Dimmen

anonymous@undisclosed.example.com (Anonymous) — Fri, 29 Nov 2019 10:58:39 +0000

Dimmen

Mit dem diesem Script kann ein Objekt generiert werden dass bei Berührung ein Menü öffnet und mit dem dann die Transparanz anderer Objekte kontrolliert werden kann.

Kontrollobjekt

Dieses Script muss in das Objekt, das quasi als Fernbedienung dienen soll. Die Namen werden dabei im Array WALL_OPTIONS festgelegt.

// This program is free software; you can redistribute it and/or
// modify it under the terms of the GNU General Public License
// as published by the Free Software Foundation; either version 2
// of the License, or (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// (C) 2007 Abba Thiebaud>SecondLifer  
// Please remember, I do not offer support for this script; your use of
// this script is your acknowledgement and agreement to the above
// terms.
//
// DO NOT REMOVE THE ABOVE HEADER FOR ANY REASON WHATSOEVER.
 
// Window Controller Script (put into controller prim)
list TINT_OPTIONS = ["40%", "20%", "None", "100%", "80%", "60%"];
list WALL_OPTIONS = ["Lower Front", "Lower Back", "Lower Sides", "Upper Front", "Upper Back", "Upper Sides", "Ceiling", "All"];
integer UPPER_FRONT = -28394;
integer LOWER_FRONT = -28395;
integer UPPER_BACK  = -28396;
integer LOWER_BACK  = -28397;
integer UPPER_SIDE  = -28398;
integer LOWER_SIDE  = -28399;
integer CEILING     = -28400;
integer CHANNEL     = -28393;
integer wallChannel;
integer allWalls;
 
PaintAllWalls(string tintLevel)
{
    integer i;
    integer j;
    
    j = -28394;
 
    for (i = 0; i < 7; i++)
    {
        llSay(j, tintLevel);
        j--;
    } // end for
} // end PaintAllWalls
   
default {
    state_entry()
    {
        llListen(CHANNEL, "", NULL_KEY, ""); // listen for dialog answers (from multiple users)
    } // end state_entry()
 
    touch_start(integer total_number)
    {
        llDialog(llDetectedKey(0), "Which wall would you like to tint?", WALL_OPTIONS, CHANNEL); // present dialog on click
        allWalls = 0;
    } // end touch_start()
 
    listen(integer channel, string name, key id, string message)
    {
        if (llListFindList(TINT_OPTIONS + WALL_OPTIONS, [message]) != -1)  // verify dialog choice
        {
            if (message == "Upper Front")
            {
                llDialog(id, "How much tint would you like?", TINT_OPTIONS, CHANNEL);
                wallChannel = UPPER_FRONT;
            }
            else if (message == "Upper Back")
            {
                llDialog(id, "How much tint would you like?", TINT_OPTIONS, CHANNEL);
                wallChannel = UPPER_BACK;
            }
            else if (message == "Upper Sides")
            {
                llDialog(id, "How much tint would you like?", TINT_OPTIONS, CHANNEL);
                wallChannel = UPPER_SIDE;
            }
            else if (message == "Lower Front")
            {
                llDialog(id, "How much tint would you like?", TINT_OPTIONS, CHANNEL);
                wallChannel = LOWER_FRONT;
            }
            else if (message == "Lower Back")
            {
                llDialog(id, "How much tint would you like?", TINT_OPTIONS, CHANNEL);
                wallChannel = LOWER_BACK;
            }
            else if (message == "Lower Sides")
            {
                llDialog(id, "How much tint would you like?", TINT_OPTIONS, CHANNEL);
                wallChannel = LOWER_SIDE;
            }
            else if (message == "Ceiling")
            {
                llDialog(id, "How much tint would you like?", TINT_OPTIONS, CHANNEL);
                wallChannel = CEILING;
            }
            else if(message == "All")
            {
                llDialog(id, "How much tint would you like?", TINT_OPTIONS, CHANNEL);
                allWalls = 1;
             }
 
            if (message == "100%")
            {
                if(allWalls == 1)
                {
                    PaintAllWalls("100");
                }
                else
                {
                    llSay(wallChannel, "100");
                }
             }
            else if (message == "80%")
            {
                if(allWalls == 1)
                {
                    PaintAllWalls("80");
                }
                else
                {
                    llSay(wallChannel, "80");
                }
             }
            else if (message == "60%")
            {
                if(allWalls == 1)
                {
                    PaintAllWalls("60");
                }
                else
                {
                    llSay(wallChannel, "60");
                }
             }
            else if (message == "40%")
            {
                if(allWalls == 1)
                {
                    PaintAllWalls("40");
                }
                else
                {
                    llSay(wallChannel, "40");
                }
             }
            else if (message == "20%")
            {
                if(allWalls == 1)
                {
                    PaintAllWalls("20");
                }
                else
                {
                    llSay(wallChannel, "20");
                }
             }
            else if (message == "None")
            {
                if(allWalls == 1)
                {
                    PaintAllWalls("0");
                }
                else
                {
                    llSay(wallChannel, "0");
                }
             }
          } // end if (valid message)
    }  // end listen
} // end default

Dimm-Objekt

Dieses Script muss in alle wählbaren Objekte. Dabei muss ein Channel durch Entfernen des Platzhalters aktiviert werden, wodurch das Objekt durch das Kontrollscript ansprechbar wird.

//Here the target aka Windows, put this script into them.
//integer chan = -28394; // uncomment for UPPER_FRONT
//integer chan = -28395; // uncomment for LOWER_FRONT
//integer chan = -28396; // uncomment for UPPER_BACK
//integer chan = -28397; // uncomment for LOWER_BACK
//integer chan = -28398; // uncomment for UPPER_SIDE
//integer chan = -28399; // uncomment for LOWER_SIDE
//integer chan = -28400; // uncomment for CEILING
 
default
{
        state_entry()
        {
                llListen(chan, "", NULL_KEY, "" );
        }
 
        listen( integer channel, string name, key id, string message )
        {
                if ( message == "100" )
                {
                        llSetAlpha(1.0, ALL_SIDES);
                }
                else if ( message == "80" )
                {
                        llSetAlpha(0.8, ALL_SIDES);
                }
                else if ( message == "60" )
                {
                        llSetAlpha(0.6, ALL_SIDES);
                }
                else if ( message == "40" )
                {
                        llSetAlpha(0.4, ALL_SIDES);
                }
                else if ( message == "20" )
                {
                        llSetAlpha(0.2, ALL_SIDES);
                }
                else if ( message == "0" )
                {
                        llSetAlpha(0.0, ALL_SIDES);
                }
        }
}

Door

anonymous@undisclosed.example.com (Anonymous) — Fri, 29 Nov 2019 10:58:39 +0000

Door

Mit diesem Script kann man Türen öffnen und schliessen.

//door script
 
vector gPos;
 
default {
    state_entry() {
        llSetRot(llEuler2Rot(<0,0,0>));
    }
 
    touch_start(integer total_number) {
        gPos = llGetPos();
        llSetRot(llEuler2Rot(<0,0,PI/2>));
        llSetTimerEvent(2.0);
    }
    timer() {
        llResetScript();
        llSetPos(gPos);
    }
}

Radio

anonymous@undisclosed.example.com (Anonymous) — Fri, 29 Nov 2019 10:58:42 +0000

Radio

Mit diesem Script kann man durch klicken auf ein Prim die Musik auf einer Region ein-, aus- und umschalten. Die Zulieferer der Musik können auf die eigenen Wünsche angepasst werden.

integer totalNum = 4;
integer currentNum = 1;
string currentstation;
string currenturl;
 
string id1 = "Radio Off";
string id2 = "Grateful Dead Radio";
string id3 = "Sky.FM Roots Reggae";
string id4 = "Sky.FM Bossanova";
string id5 = "KTRU Radio";
string url1 = "";
string url2 = "http://gdradio.radioserver.co.uk:8160/";
string url3 = "http://205.188.215.225:8000";
string url4 = "http://160.79.128.40:7804";
string url5 = "http://128.42.33.17:80/";
 
setNumber()
{
    if (currentNum == 1)
    {
        currentstation = id1;
        currenturl = url1;
    }
    else if (currentNum == 2)
    {
        currentstation = id2;
        currenturl = url2;
    }
    else if (currentNum == 3)
    {
        currentstation = id3;
        currenturl = url3;
    }
    else if (currentNum == 4)
    {
        currentstation = id4;
        currenturl = url4;
    }
    else if (currentNum == 5)
    {
        currentstation = id5;
        currenturl = url5;
    }
    llSetText(currentstation, <1,1,1>,1.0);
    llSetParcelMusicURL(currenturl);
   
}
 
default
{
    state_entry()
    {
        llSetText("Radio",<1,1,1>,1.0);
    }
    touch_start(integer total_number)
    {
    currentNum += 1;
    if (currentNum > totalNum) currentNum = 1;
    setNumber();
    }
}

Sit Target

anonymous@undisclosed.example.com (Anonymous) — Fri, 29 Nov 2019 10:58:43 +0000

Sit Target

Mit diesem Script kann man sich korrekt auf Prims setzen. Die Sitzposition lässt sich anpassen.

vector offset = <0,0,0>;
rotation rot = <0,0,0,1>;
 
default
{
    state_entry()
    {
        llSitTarget(offset,rot);
    }
 
}

move IT Home Base

Dimmen

Dimmen

Kontrollobjekt

Dimm-Objekt

Door

Door

Radio

Radio

Sit Target

Sit Target